Normally these pages use frames. Unfortunately, your browser does not support frames. Below you find the complete index of content from the dicussion forum PCB-FAQ.COM.
PCB-POOL
|
PCB-POOL : General
| Soldermask on XXS series (Raul, 10.08.2008, 16:32:26) |
| Pads available on copper pour area through solder mask (Adrian, 03.08.2007, 14:04:24) |
| thermal vias for QFN package (jason welsby, 27.07.2007, 13:13:59) |
| first i need to sure (Danish Naeem, 05.06.2007, 13:40:31) |
| Discount points (duncan mobley, 02.05.2007, 17:13:19) |
| Are there 2 separate routing charges (Ian Todd, 11.01.2007, 00:59:59) |
| Finish of Soldermask (Robin Dripps, 20.12.2006, 00:59:59) |
| Track Spacing (James Hook, 15.12.2006, 00:59:59) |
| Protel Version 2.8 (Noordink, 27.10.2006, 00:59:59) |
| Via on a pad apply on BGA (Eva, 15.08.2006, 07:55:07) |
| Milled Slot in Board (John Harper, 08.08.2006, 20:44:21) |
| PCB Finish (Simon, 18.05.2006, 11:16:29) |
| PCB material (Nicola Bedetti, 18.05.2006, 08:18:38) |
| Some questions (Alberto, 23.03.2006, 21:47:12) |
| BGA packages (Paul, 12.10.2005, 15:57:24) |
| Maximum panel size (David Bird, 05.09.2005, 10:55:33) |
| Press-in connectors (Denis, 04.05.2005, 02:58:20) |
| Hole & Pad sizes (Bob Bat, 16.12.2004, 02:55:20) |
| Circular forms and PCI boards (M Bouri, 14.12.2004, 12:00:35) |
| non-copper PCBs. (Hans Rotmann, 01.11.2004, 00:30:28) |
| Question (mohammad, 10.10.2004, 20:29:41) |
| How to submit multiple boards in one panel? (Mitch Berkson, 05.10.2004, 11:49:25) |
| Minimum pad diameter om vias (Frank Mikkelsen, 02.09.2004, 11:58:45) |
| negative print of pcb circuit (Rass, 23.08.2004, 03:20:43) |
| Industrial Standard of PCB, and Testing (zhang li, 15.08.2004, 05:21:47) |
| HOLE DIAMETERS (Lawrence Montague-GIBSON, 10.08.2004, 19:54:24) |
| Multiple small PCBs (Kenny Millar, 17.06.2004, 14:27:21) |
| Soldering & "Minipanel" (Sylvain Munaut, 05.04.2004, 09:06:47) |
| Silk Screen Legend (andy, 30.03.2004, 23:48:26) |
| Hole sizes for new footprint. (Derek Hughes, 29.02.2004, 18:31:18) |
| pcb and tab (Latoya, 18.02.2004, 19:01:31) |
| Quickroute EDS 3.2.4 v Tsien Boardmaker 2 (Clive Stockham, 17.12.2003, 19:05:47) |
| lead free manufacture of PCBs (pat, 22.09.2003, 09:39:36) |
| LAWS REGARDING PCB MANUFACTURE (PAT, 17.09.2003, 13:37:23) |
| PCB size (Xavier Lambrecht, 17.06.2003, 12:29:30) |
| PCB shape (Tony Garvey, 28.05.2003, 12:58:33) |
| EDS 3 Update (Lawrence Montague-Gibson, 17.04.2003, 22:34:50) |
| Ariadne CAD-UL (zulu, 14.04.2003, 15:26:27) |
EDS3 (Lawrence Montague-Gibson, 10.04.2003, 20:41:15)
| Re: EDS3 (Team Beta Layout, 22.04.2003, 16:30:40) |
|
| PTH on boards (John, 11.03.2003, 13:58:07) |
| RS274X + Excellon drill files. (Richard Yearsley, 28.02.2003, 22:08:37) |
| EDA-Software (Lawrence Montague-Gibson, 30.01.2003, 21:44:35) |
| Largest hole sizes? (Bob Basford, 18.12.2002, 16:55:04) |
| Six layer PCBs with PCB-POOL? (Mark Purcell, 12.12.2002, 02:09:22) |
| Slots for component pins (Geoff Cusick, 02.08.2002, 13:03:57) |
| PowerPCB CAM Output (Pete Binns, 03.07.2002, 10:53:24) |
| 4-layer small series... (Nicko, 21.06.2002, 10:28:51) |
| Metalized holes (Xavier Lambrecht, 19.06.2002, 16:35:54) |
| Small PCB's (Duncan Mobley, 27.05.2002, 10:05:03) |
| standard card sizes (shrinidhi, 16.04.2002, 05:15:23) |
| Well Done! Beta Layouts (Mat Adlard, 15.04.2002, 23:18:31) |
| inner layer (Radim, 15.04.2002, 13:57:48) |
| routing (gerald dudley, 12.03.2002, 17:27:41) |
| single-sided board (Cyril Zwahlen, 31.01.2002, 00:48:22) |
| Components (Paul McFeeters, 08.01.2002, 06:25:13) |
| Can you make any outline size (Sean McCausland, 07.10.2001, 21:50:26) |
| cuestion (filiberto Martinez, 11.09.2001, 12:19:11) |
| Ordering several small boards (Ben McKeegan, 02.09.2001, 15:48:31) |
| Summer&delays (Schaerrer, 20.07.2001, 10:56:17) |
| Payment in Pounds Sterling (Ian Lake, 18.07.2001, 10:56:48) |
| over delivery at half price (tardy, 29.05.2001, 11:42:29) |
| PCB Layers and Thickness. (Chris Howard, 05.01.2001, 18:00:11) |
| RE: pricing & file info (Martin Broadbridge, 08.11.2000, 09:40:57) |
| Service suggestions (Mr Nicholas Lee, 14.09.2000, 13:18:32) |
| Files needed (B. Staton, 07.09.2000, 23:21:09) |
|
PCB-POOL : General : United States
| Rout charge (C Evans, 15.04.2006, 09:20:48) |
| Routing specifications (Jamie Moore, 14.01.2005, 16:04:37) |
| Shipping time to USA (J. Peterson, 14.09.2004, 10:45:52) |
| Board specifications (Samuel Hoffmann, 25.05.2004, 16:42:50) |
| Single Prototype two layer PCBs (Narayan A.K, 29.09.2003, 19:18:28) |
| USA order charges & tax (Joe Torre, 22.06.2002, 10:12:17) |
| VAT for non-euro countries? (Paul Urbanus, 07.02.2001, 17:31:07) |
|
PCB-POOL : Orders
| US shipping low cost (Jose Cortes, 19.10.2007, 08:01:43) |
| Payment by Visa (Allan Krogh Jensen, 26.02.2007, 08:40:21) |
| routing of pcbs in a panel (Jon Lock, 21.09.2006, 13:21:15) |
| panel order (multi pcb order) (Tiago Oliveira, 28.07.2006, 16:15:51) |
| Lead Free Boards - RoSH (andy james, 10.04.2006, 16:36:43) |
| multilayer production (Phil Dixon, 01.02.2006, 00:44:41) |
| TARGET 3001! PCB-POOL (Chuck Schneider, 16.09.2005, 21:37:02) |
| Copy of invoices (Andy Drummond, 20.07.2005, 11:06:24) |
| Order under/overdelivery (Robert Toogood, 02.06.2005, 13:37:34) |
| Credit transfer (Bob Cousins, 07.03.2004, 16:34:59) |
| Payment by Solo (Arca Artem, 05.02.2004, 19:41:57) |
| Pricing (Andrew Crosland, 15.01.2003, 12:14:19) |
| Manufacturing time (Jorge Luís, 06.12.2002, 23:32:02) |
| smd pad size specs (Viron Papadopoulos, 01.08.2002, 14:07:34) |
| Wich credit cards do you accept? (Philippe De Swert, 23.06.2002, 10:35:43) |
| Filename (Rod Whitlock, 10.04.2002, 07:56:47) |
| How do I order (Gerald Dudley, 12.03.2002, 16:31:19) |
| Maximum Proto size and shipping (Jeremy D. Grotte, 21.02.2002, 23:11:13) |
| delivery (Thijs Nicky, 16.12.2001, 12:59:17) |
| Silk screens (Tim Phillips, 31.10.2001, 14:04:13) |
| shipping (Peter Lauer, 16.10.2001, 23:34:32) |
| Order progress/query (Paul Maddox, 06.09.2001, 14:47:20) |
| Soldermask and position print on Serie XXS (Richard Wright, 24.07.2001, 11:19:32) |
| Rout charges (Geoff Cusick, 23.07.2001, 14:42:51) |
| Solder masks (tardy, 23.04.2001, 12:02:35) |
| Payment Methods (Ian Lake, 17.04.2001, 18:08:25) |
| PCBs BIGGER than eurocard (Paul Maddox, 17.04.2001, 12:51:20) |
time (desmond, 11.04.2001, 03:00:09)
| Re: time (Beta LAYOUT GmbH, 11.04.2001, 12:07:29) |
|
| Pricing (Andy, 29.03.2001, 21:06:02) |
| price inquiry (Alessandro Faggioli, 12.03.2001, 09:28:05) |
| Invoices. (David Scivier, 23.02.2001, 12:05:17) |
| Reordering (Alan Thorne, 23.01.2001, 13:52:29) |
| Ultiboard files ? Versand zu die Niederlande ? (Sander Nijssen / Motoplex, 02.01.2001, 20:39:49) |
| VAT for non EC customers (Marc Schaerrer, 06.10.2000, 22:25:44) |
vat (Tomasz Matuszczyk, 14.09.2000, 10:41:34)
| Re: vat (Beta LAYOUT GmbH, 14.09.2000, 16:50:09) |
|
| silk screen (S Pyatt, 15.05.2000, 13:56:28) |
| Prototypes (Keith Reilly, 02.05.2000, 14:36:51) |
| Under/Over delivery on single prototype? (Dan Brook, 07.02.2000, 14:30:27) |
| method of payment (Matthew Slack, 01.11.1999, 11:22:59) |
| Soldermask price (John Mapple, 21.09.1999, 10:41:06) |
|
PCB-POOL : EDA-Software
| PCB designs (Charles Boyles, 07.04.2007, 17:18:31) |
| Quick route systems (George Brennet, 03.01.2006, 19:24:48) |
| .pcb file (anne-marie, 22.12.2004, 20:02:38) |
| Pirates (andy, 30.03.2004, 00:01:11) |
| Quickroute EDS 3.2.4 v Tsien Boardmaker 2 (Clive Stockham, 17.12.2003, 19:19:40) |
| Expedition PCB (Paul Heywood, 21.11.2003, 12:51:33) |
| EasyPC 6.0 and/or 7.0 (marek, 21.09.2003, 21:15:14) |
| selecting PCB layout software (Albert, 13.06.2003, 17:10:04) |
| Support for AutoTrax EDA (James Gilbert, 14.03.2003, 14:42:32) |
| Easy-PC 4.0.4 (Terry Heathcote, 25.02.2003, 16:22:16) |
| PADS PCB (Aneesh Tuljapurkar, 21.02.2003, 12:49:43) |
| Convert TOPCAD (Eli Keren, 27.09.2002, 11:04:10) |
| Drill size or finished hole size (Gyles, 12.08.2002, 20:12:12) |
| EDA Swr for 3d output (Somendra, 09.08.2002, 07:13:21) |
| CadStar files (Alan Webster, 10.12.2001, 13:24:19) |
| format enquiry (ted read, 27.06.2001, 16:23:20) |
| PCB files by Ivex Winboard (Lim, 30.04.2001, 22:51:03) |
| CAM350 file format (Anton Sizikov, 30.03.2001, 17:49:19) |
| can you recommend a layout package (Andrew Grillet, 30.03.2001, 16:57:04) |
| Target Discover (Chris Howard, 16.01.2001, 16:04:43) |
| QCad files (Bob Cousins, 27.10.2000, 13:34:18) |
Format (Paul R. Gorton, 11.04.2000, 12:50:34)
| Re: Format (Beta LAYOUT GmbH, 11.04.2000, 13:36:32) |
|
| Drill size (Virgilio Lattanzi, 04.04.2000, 10:25:42) |
| Supported formats - VUTRAX (James Gilbert, 10.03.2000, 17:20:48) |
| Easy PC layouts (Graham Hallett, 24.02.2000, 15:05:18) |
Tango (Peter Crowe, 25.01.2000, 10:36:51)
| Re: Tango (Beta LAYOUT GmbH, 25.01.2000, 14:00:31) |
|
|
PCB-POOL : EDA-Software : GC-Prevue
| GCPREVUEprice (DukeII, 15.04.2007, 11:13:37) |
| PRIMARY STEPS TO GET PCB LAYOUT (Yogendra narayan mishra, 11.04.2006, 10:32:38) |
| Drill table import (Paul Bayton, 09.02.2005, 02:39:24) |
| import failing for drill.lst (Nammona Frederick, 26.01.2005, 11:59:28) |
| GC-Prevue 12.2.2 (Florin Stroiescu, 02.05.2004, 13:56:22) |
| syntax error (Lawrence, 10.05.2003, 17:52:39) |
editor (Lawrence, 08.05.2003, 22:49:37)
| Re: editor (Beta LAYOUT GmbH, 09.05.2003, 09:32:40) |
|
| editor (Lawrence Montague-Gibson, 07.05.2003, 21:29:44) |
| Layer Numbers (Gyles, 05.08.2002, 13:44:41) |
| Component Outline Overhangs (Justin Halls, 05.04.2002, 09:49:30) |
| Sending the correct data format (Gareth Horth, 22.10.2001, 12:06:51) |
| Another newbie question (Paul Maddox, 23.08.2001, 11:50:53) |
| GC-Prevue 9.06 (Geoff Cusick, 13.08.2001, 12:57:36) |
| Still wondering transfer from PADS to GC-prevue (Martti Palonen, 16.02.2001, 12:08:11) |
| Data transferring from PADS to GC-prevue ( Martti Palonen, 14.02.2001, 11:01:12) |
| is there an english version og GC-Prevue (Dave Taylor, 11.10.2000, 21:45:41) |
| Rout / Profile information (David Gibson, 08.12.1999, 13:44:11) |
|
PCB-POOL : EDA-Software : EDWin
|
PCB-POOL : EDA-Software : OrCAD
| Mulltilayer PCB (Richard Colman, 16.03.2006, 22:05:54) |
| Several small .MAX designs submitted as one prototype board? (Derren Crome, 17.10.2005, 16:16:29) |
| Cheap cracked AutoDesk AutoCAD 2006,Algor v16, Microstation 2004, Cosmos Works v2003, XSteel v10, Archicad v9, MSC Nastran 2005, Chief Architect v10, (Lew, 14.09.2005, 16:11:10) |
| Padstack definition for SMD chip. (thibaut, 18.11.2004, 11:45:46) |
| Padstack definition for SMD (thibaut, 17.11.2004, 21:24:42) |
| OrCAD to Allegro problems (Dewald, 23.04.2004, 16:27:22) |
| .MAX repetition (mark thompson, 29.04.2003, 11:32:33) |
| placing the order (platokurian, 31.08.2002, 06:33:31) |
| simulation (platokurian, 31.08.2002, 05:56:39) |
| ground and power planes (Radim, 08.04.2002, 16:45:20) |
| ORCAD: BRIDGE RECTIFIER FOOTPRINT?? (MILTOS, 18.03.2002, 01:16:58) |
| Software selection (Phillip Belcher, 08.03.2002, 17:33:27) |
| OrCad *.max files (Ricardo Madureira, 04.07.2001, 15:43:59) |
| Resolution of routing in OrCAD 9.0 (Rubén Garrido, 09.05.2001, 12:18:48) |
| Change the track's width on the same net (Ruben Garrido, 27.04.2001, 14:20:23) |
| via's minimal dimension and external isolation layer in OrCAD (Ruben Garrido, 26.04.2001, 12:11:12) |
| Orcad Output files (rob walkington, 15.01.2001, 12:36:33) |
| ORCAD FILE TYPE (SEAN COFFEY, 15.03.2000, 14:31:48) |
|
PCB-POOL : EDA-Software : Quickroute
| eds registration (Frank, 10.01.2006, 14:54:42) |
| EDS update (Lawrence, 29.05.2003, 22:45:31) |
| Quickroute 4 Pro (Richard Webb, 29.01.2002, 22:22:36) |
Quickroute 5 files (Lee Wiltshire (G0IAY), 27.09.2000, 14:07:57)
| Re: Quickroute 5 files (Beta LAYOUT GmbH, 27.09.2000, 20:33:24) |
| Re: Quickroute 5 files (system, 15.03.2001, 15:52:40) |
| Re: Quickroute 5 files (system, 19.03.2001, 10:17:46) |
| Re: Quickroute 5 files (system, 19.03.2001, 10:18:26) |
| Re: Quickroute 5 files (sasa, 16.05.2001, 12:53:24) |
| Re: Quickroute 5 files (sasa, 16.05.2001, 12:53:42) |
|
|
PCB-POOL : EDA-Software : Protel
| Before Manufacturing (danish, 05.06.2007, 14:41:25) |
| Layer of Pad (danish, 05.06.2007, 14:12:34) |
| making manual tracks in Protel 2.7.1 too slow (Jim, 15.07.2006, 10:43:16) |
| Soldermask and via (Nico, 20.04.2006, 16:10:06) |
| pcb merging (mahmoud, 14.11.2005, 21:17:14) |
| protel resources for PCB design (ramakrishnan, 27.10.2005, 09:42:23) |
| electronic software (tri ramadhani, 15.03.2005, 08:51:32) |
| Protel, how to set Physical dimension of PCB (Frank Mikkelsen, 02.09.2004, 11:52:42) |
| Protel holes (Jonas, 17.05.2004, 09:14:10) |
| General Specifications of PCB. (Manohar Jadhav, 01.01.2004, 05:41:39) |
| Cross Probing. (Manohar Jadhav, 27.11.2003, 08:00:45) |
| file format (angel, 14.10.2003, 00:03:36) |
| pcb file viewer (Rick Austin, 06.08.2003, 17:58:52) |
| pcb file format (mostafa samadi, 15.07.2003, 06:24:48) |
| ERC (April McNeil, 23.04.2003, 18:59:43) |
| protel 2.7.1 (GHULAM FAREED TAHIR, 07.04.2003, 16:01:48) |
| protel drill file format (Gilbert, 29.08.2002, 10:18:23) |
| Protel Software (frtg, 08.01.2002, 01:14:12) |
| Protel 2.7.1 compatible? (Jeremy Grotte, 01.09.2001, 12:33:36) |
| Drill file format (Geoff Salt, 01.05.2001, 12:52:57) |
| PCB File Format (steve booth, 26.02.2001, 16:04:07) |
| layout file (Sotiris Sotiropoulos, 23.03.2000, 11:45:33) |
|
PCB-POOL : EDA-Software : Proteus
| PLEASE VERY IMPORTANT (Emrah, 05.04.2005, 14:58:41) |
| PTH plating thickness (Steve Church, 13.03.2003, 09:16:56) |
| Track, pad, via characteristics for Proteous within the pcb-pool (Lee Ainscough, 14.01.2003, 14:28:41) |
| ATTENTION: We now accept Proteus (Beta LAYOUT GmbH, 26.04.2002, 10:33:39) |
| PROTEUS PCB files. (Neil Horder, 15.11.2001, 11:49:51) |
| source files (Adrian Wood, 21.10.2000, 01:08:00) |
|
PCB-POOL : EDA-Software : Eagle
| Eagle Version 5 (Andy Greensted, 21.07.2008, 12:21:10) |
| POLYGON (Rik, 10.07.2008, 13:09:32) |
| Thermals for vias (Newman, 08.01.2008, 13:59:17) |
| Copper pour in Eagle (Ken Conroy, 22.12.2007, 18:38:55) |
| coupon? (Wayne, 12.10.2007, 18:19:31) |
| Extra cost using DRU file (Byron, 08.10.2007, 18:05:17) |
| Version of Eagle SW (Byron, 04.09.2007, 21:38:31) |
| elongated holes (Chuck Bade, 20.10.2006, 00:59:59) |
| routing charges (Sam, 16.10.2006, 00:59:59) |
| Eagle mac edition (Sam, 16.10.2006, 00:59:59) |
| Design rules for 4 layer board (Gareth, 28.09.2006, 00:59:59) |
| please some body help me! (ali, 01.04.2006, 06:06:19) |
| convert protel .gbl to eagle file (andreas, 24.01.2006, 11:04:53) |
| AutoDesk AutoCAD 2006,Algor v16, Microstation 2004, Cosmos Works v2003, XSteel v10, Archicad v9, MSC Nastran 2005, Chief Architect v10, Solidworks 200 (Dot, 14.09.2005, 16:13:25) |
| Which layers to use? (Rafe, 29.08.2005, 21:45:48) |
| Pad layer in Eagle (John Wallace, 10.06.2005, 16:45:48) |
| DRC file for Eagle software (Patrick Twomey, 15.12.2003, 15:53:22) |
| Library - device with multiple power pins (Kenny, 04.06.2003, 12:28:34) |
| Soldermask in Eagle. (Chris Howard, 17.02.2003, 10:33:22) |
| Self made boards combining (Cyril, 12.02.2003, 00:09:32) |
| Combining Boards (Mike Coates, 16.09.2002, 16:14:06) |
| Grid size in auto routing with Eagle (Paresh Paluskar, 23.04.2002, 14:44:35) |
| Newbie questions (Arthur Magill, 22.08.2001, 18:54:03) |
| New Eagle User (Bill Young, 14.09.2000, 15:00:51) |
|
PCB-POOL : EDA-Software : Ultiboard
| single sided boards (Michael, 27.11.2005, 01:28:01) |
Printlayout with Ultiboard. (Kjell Karlsen, 03.05.2000, 18:31:38)
| Re: Printlayout with Ultiboard. (Beta LAYOUT GmbH, 08.05.2000, 10:15:31) |
| Re: Printlayout with Ultiboard. (turhan, 04.02.2001, 19:39:56) |
| Re: Printlayout with Ultiboard. (turhan, 04.02.2001, 19:40:16) |
| ultiboard program (ramazan, 25.05.2001, 22:38:46) |
| Re: Printlayout with Ultiboard. (erkan, 23.07.2001, 17:32:54) |
| Re: Ploterlayout with Ultiboard. (ataman subasi, 25.07.2001, 11:34:51) |
|
|
PCB-POOL : EDA-Software : TARGET
| Slots for Connector (Richard Girling, 20.06.2006, 11:01:50) |
| 6 layer PCB (Moti Litochevski, 23.08.2005, 21:45:40) |
| Adding silkscreen text and lines to a new package (Moti Litochevski, 05.07.2005, 16:27:18) |
| Snap to centre of off grid pad (Stephen Clarke, 14.04.2005, 14:57:26) |
| PCB-POOL edition (Roger Irwin, 08.12.2004, 01:24:05) |
| Can I delete and rename pages? (Gyles Harvey, 15.10.2003, 20:11:42) |
| New component design (Narayan AK, 10.10.2003, 05:24:13) |
| Beep on connections (Gyles Harvey, 28.07.2003, 21:22:42) |
| Target3001 (Jamie, 06.11.2002, 14:33:10) |
| TARGE | |